SW6 VGA Audio |
|
Video |
Gain | Unity |
Bandwidth | 350 MHz (-3 dB) |
Crosstalk | <-68 dB @ 10 MHz, <-39 dB @ 100 MHz |
|
Video input |
Number/signal type | 6 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video |
Connectors | 6 female 15-pin HD |
Pin connections | ID bits on pins 4, 11, 12, 15 from inputs 1 through 6 are tied together and passed to the output. Pin 9 of all inputs is floating. |
Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset |
Impedance | 75 ohms |
Horizontal frequency | 15 kHz to 145 kHz |
Vertical frequency | 30 Hz to 170 Hz |
Return loss | <-42 dB @ 5 MHz |
|
Video output |
Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video |
Connectors | 1 female 15-pin HD |
Nominal level | 1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video |
Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p (follows input) |
Impedance | 75 ohms |
Return loss | <-43 dB @ 5 MHz |
DC offset | ±5 mV maximum with input at 0 offset |
|
Sync |
Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync (follows input) |
Input level | 1V to 5 Vp-p |
Output level | TTL: 5 Vp-p, unterminated |
Input impedance | 510 ohms |
Output impedance | 75 ohms |
Polarity | Positive or negative |
|
Audio |
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
Bandwidth | 100 kHz at -3 dB |
S/N | >90 dB, balanced, at maximum output (unweighted) |
Crosstalk | <-65 dB @ 20 kHz, <-80 dB @ 1 kHz and below 60 Hz, fully loaded |
Stereo channel separation | >80 dB @ 1 kHz, >60 dB @ 20 kHz |
CMRR | >75 dB @ 20 Hz to 20 kHz |
|
Audio input |
Number/signal type | 6 stereo, balanced/unbalanced |
Connectors | (6) 3.5 mm captive screw connectors, 5 pole |
Impedance | >12k ohms unbalanced, 25k ohms unbalanced, DC coupled |
Nominal level | -10 dBV (316 mV) |
Maximum level | +18 dBu, (balanced or unbalanced) at 1% THD+N |
Input gain adjustment | –15.0 dB to +9.0 dB, adjustable per input |
NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output |
Number/signal type | 1 stereo, balanced/unbalanced |
Connectors | (1) 3.5 mm captive screw connector, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±0.1 dB channel to channel |
Nominal level | -4 dBV (63.1 mV) |
Maximum level (Hi-Z) | >+26 dBu, balanced; >21 dBu, unbalanced at 1% THD+N |
Maximum level (600 ohm) | >+21 dBm, balanced; >+15 dBm unbalanced at 1% THD+N |
|
Control/remote — switcher |
Serial control port | RS-232, female 9-pin D connector |
Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
Serial control pin configurations | 2 = Tx, 3 = Rx, 5 = GND |
Contact closure | Female 9-pin D connector |
Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) |
|
General |
Power | 100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal |
Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling | Convection, no vents |
Mounting | |
Rack mount | Yes, with included rack shelf kit |
Furniture mount | Yes, with optional under-desk mounting kit |
Enclosure type | Metal |
Enclosure dimensions | 1.75" H x 17.1" W x 9.4" D (1U high, full rack wide) (4.4 cm H x 43.4 cm W x 23.9 cm D) (Depth excludes connectors.) |
Product weight | 4.5 lbs (2.0 kg) |
Shipping weight | 7 lbs (4 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance | |
Safety | CE, c-UL, UL |
EMI/EMC | CE, FCC Class A |
Product warranty | 3 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(7.6-102109-D11) |