SW2 VGA DA2 AF R Retired

1U, Two Input, Dual Output VGA and Stereo Audio Switcher with Front and Rear Panel Inputs

Key Features

300 MHz (-3 dB) RGB video bandwidth
Compatible with VGA-QXGA and HDTV component video signals
Auto-input switching
1U, full rack width metal enclosure

Model	Version Description	Part #
SW2 VGA DA2 AF R	1U with Front & Rear Inputs	60-368-11	Retired

This product has been retired.

The Extron SW2 VGA DA2 AF R is a combination active switcher and distribution amplifier with stereo audio. It provides two inputs and dual, independently buffered outputs. This mountable combination switcher/distribution amplifier provides 300 MHz (-3 dB) RGB video bandwidth and is compatible with VGA-QXGA signals.

The SW2 VGA DA2 AF R is a one box solution for professional presentation environments. It has two female 15-pin HD connectors for computer-video and audio inputs — one on the front panel for easy laptop hookup and one on the rear panel for PCs installed in a fixed location. Two female 15-pin HD outputs and one balanced/unbalanced stereo audio output on a captive screw connector are located on the back panel for connection to display devices such as a preview monitor and a projector.

In addition, the SW2 VGA DA2 AF R can be both rack-mounted and furniture-mounted. The 1U metal enclosure ships with detachable ears for rack mounting. This switcher features an internal international power supply with an unswitched power connector, eliminating the need for costly electrical wiring to podiums, tables, and other installation surfaces. Two spaces for AAP - Architectural Adapter Plates provide optional connection access for most peripheral equipment, including RJ-45 and RJ-11 phone and data jacks. The SW2 VGA DA2 AF R also features tactile switch buttons with LEDs, and can be remotely controlled via contact closure. It offers both a manual and an auto-input switching mode.

Features

Inputs: Two female 15-pin HD connectors for computer video; two 3.5 mm stereo mini jacks for audio

Outputs: Two female 15-pin HD connectors for computer video; captive screw connector for audio

300 MHz (-3 dB) RGB video bandwidth

Compatible with VGA-QXGA and HDTV component video signals

Front panel opening for two AAP - Architectural Adapter Plates

Dual buffered video and audio outputs — Allows for simultaneous viewing and recording of the selected input signal, eliminating the cost of a separate distribution amplifier.

ID bits from inputs 1 and 2 are routed to the local monitor output

Active PC audio buffering — Converts unbalanced PC audio to balanced, line level signals, eliminating noise over long cable runs.

Auto-input switching — Automatically switches to the highest-numbered input with an active video signal.

Contact closure remote control

1U, full rack width metal enclosure

Unswitched AC outlet - 600 watts max

Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.

OPTIONAL ACCESSORIES
	Cable Clamp / Pass-Through for Extron RGB 198 and SW2 VGA DA2 AF R
	MBU 123	Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products

OPTIONAL ACCESSORIES

Cable Clamp / Pass-Through for Extron RGB 198 and SW2 VGA DA2 AF R

MBU 123

Low-Profile Mount Kit for 1/8, 1/4, and 1/2 Rack Width Products

SIMILAR PRODUCTS
	VSW 2VGA A	Two Input VGA and Stereo Audio Switcher

SIMILAR PRODUCTS

VSW 2VGA A

Two Input VGA and Stereo Audio Switcher

Specifications

SW2 VGA DA2 A/AF/AF R

Video

Gain

Unity

Bandwidth

300 MHz (-3 dB)

Video input

Number/signal type

2 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*

Connectors

2 VGA female 15-pin HD

Nominal level

1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels

Analog: 0.3 V to 1.5 Vp-p with no offset

Impedance

75 ohms

Horizontal frequency

15 kHz to 145 kHz

Vertical frequency

30 Hz to 170 Hz

Video output

Number/signal type

2 buffered VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*

Connectors

2 VGA female 15-pin HD

Nominal level

1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels

0.4 V to 1.8 Vp-p (follows input)

Impedance

75 ohms

NOTE	*RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector.

Sync

Input type

RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync

Output type

RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync

Input level

1.7 V to 5.0 Vp-p

Output level

TTL: 5.0 Vp-p, unterminated

Input impedance

510 ohms

Output impedance

50 ohms

Max. input voltage

5.0 Vp-p

Max. rise/fall time

40 ns

Polarity

Positive or negative (follows input)

Audio

Gain

Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±0.05 dB

THD + Noise

0.03% @ 1 kHz at nominal level

S/N

>90 dB at maximum output (unweighted)

Crosstalk

<-65 dB @ 20 kHz, <-80 dB @ 1 kHz and below 60 Hz

Stereo channel separation

>80 dB @ 1 kHz

CMRR

>75 dB @ 20 Hz to 20 kHz

Audio input

Number/signal type

2 stereo, unbalanced

Connectors

(2) 3.5 mm female stereo jacks

Impedance

>10k ohms, balanced/unbalanced, AC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+8 dBV, (balanced or unbalanced) at 1% THD+N

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

Number/signal type

1 stereo, balanced/unbalanced

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1 dB channel to channel

Nominal level

-2 dBu balanced, -10 dBV (316 mVrms) unbalanced

Maximum level (Hi-Z)

>+16 dBu, balanced; >+8 dBV, unbalanced at 1% THD+N

Maximum level (600 ohm)

>+10 dBm, balanced; >+4 dBV, unbalanced at 1% THD+N

Control/remote — switcher

Contact closure

Momentary, on a 3.5 mm captive screw connector

Contact closure pin configurations

1 = input #1, 2 = input #2

General

Power

SW2 VGA DA2 A/AF

100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A power supply, regulated

SW2 VGA DA2 A/AF's power input requirements

12 VDC, 0.2 A

SW2 VGA DA2 AF R

100 VAC to 240 VAC, 50-60 Hz, 12 watts, internal

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, no vents

Mounting

Rack mount

SW2 VGA DA2 A/AF

Yes, with optional 1U rack shelf

SW2 VGA DA2 AF R

Yes, with included rack mounting kit

Furniture mount

SW2 VGA DA2 A/AF

Yes, with included under-desk mounting kit

SW2 VGA DA2 AF R

Yes, with optional under-desk mounting kit

Pole mount

SW2 VGA DA2 A/AF

Yes, with optional PMK 200 pole mount kit

SW2 VGA DA2 AF R

Yes, with optional PMK 200 pole mount kit

Enclosure type

Metal

Enclosure dimensions

SW2 VGA DA2 A/AF

1.0" H x 8.75" W x 3.0" D
2.5 cm H x 22.2 cm W x 7.6 cm D
(Depth excludes connectors.)

SW2 VGA DA2 AF R

1.75" H x 17.4" W x 3.0" D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 7.6 cm D
(Depth excludes connectors.)

Product weight

SW2 VGA DA2 A/AF

1.1 lbs (0.5 kg)

SW2 VGA DA2 AF R

2.6 lbs (1.2 kg)

Shipping weight

SW2 VGA DA2 A/AF

4 lbs (2 kg)

SW2 VGA DA2 AF R

7 lbs (4 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, KCC, VCCI

Warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.1-061314-D8)

SW2 VGA DA2 AF R Retired

Features

Specifications

Diagram

Panel Drawing