| Video |
|---|
| Gain | Unity (0.70V p-p),: (0.725V p-p) 50% peaking, (0.75V p-p) 100% peaking |
| Bandwidth | 300 MHz (-3dB) |
| Video input |
|---|
| Number/signal type | 1: analog RGBHV, RGBS, RGsB, RsGsBs |
| Connectors | |
| RGB 500, RGB 500 Dual, RGB 508 | 1: 9-pin D male, MBC/LBC cable or buffer |
| RGB 560, RGB 560 Dual, RGB 568, RGB 560 AKM | 1: 15-pin HD female |
| Minimum/maximum levels | Analog: 0.3V to 1.5V p-p with no offset |
| Impedance | 75 ohms or High Z, switchable (set to 75 ohms if no local monitor is connected) |
| Horizontal frequency | Autoscan 15 kHz to 130 kHz |
| Vertical frequency | Autoscan 30 Hz to 120 Hz |
| Return loss | -30dB @ 5 MHz |
| Maximum DC offset | 4.0V |
| Video output |
|---|
| Number/signal type | 1: analog RGBHV, RGBS, RGsB |
| Connectors | |
| All models | 5 BNC female |
| RGB 560, RGB 560 Dual, RGB 568, RGB 560 AKM | 1: 15-pin HD female for buffered local monitor output |
| Minimum/maximum levels | 0.70V to 0.75V p-p with no offset and 0.7V p-p input |
| Impedance | 75 ohms |
| Return loss | -30dB @ 5 MHz |
| Sync |
|---|
| Input type | RGBHV TTL (±), RGBS TTL (-), RGsB 0.3V (-), RsGsBs 1.3V (-) |
| Output type | RGBHV (±), RGBS(-), RGsB (-) |
| Input level | 2V to 5.5V p-p with ±0.3VDC offset (max.) |
| Output level | 4V to 5V p-p |
| Input impedance | 10 kohms |
| Output impedance | 75 ohms |
| Max. input voltage | 5.7V p-p |
| Max. propagation delay | 48 nS |
| Max. rise/fall time | 3.5 nS |
| Polarity | |
| RGB 560 AKM | RGBHV: Polarity follows input when RGBHV is input and the |
| sync polarity switch is set to Off. Sync polarity is negative if |
| the sync polarity switch is set to On. |
| RGBS, RGsB | Negative |
| All other models | RGBHV: Polarity follows input when RGBHV is input and the |
| bottom panel sync polarity jumper is set to follow (pin 1 jumpered |
| to pin 2). Sync polarity is negative if the sync polarity jumper |
| is set to negative (pin 2 jumpered to pin 3). |
| RGBS, RGsB | Negative |
| Audio |
|---|
| Gain | Unbalanced 0dB, balanced +6dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05dB |
| THD + Noise | 0.03% @1 kHz,: 0.3% @ 20 kHz at rated maximum output drive |
| S/N | >90dB at rated maximum output (14dBm), balanced |
| Stereo channel separation | >95dB @ 1 kHz to 20 kHz |
| Audio input |
|---|
| Number/signal type | 1 PC level stereo, unbalanced |
| Connectors | 1: 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) |
| Impedance | 10 kohms, DC coupled |
| Maximum level | +8.5dBu,: (unbalanced) at stated %THD+N |
| Audio output |
|---|
| Number/signal type | 1 stereo (2 channel), balanced/unbalanced |
| Connectors | 1: 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced,: 100 ohms balanced |
| Gain error | ±0.1dB channel to channel |
| Maximum level (600 ohm) | >+14dBm, balanced at stated %THD+N |
| General |
|---|
| Power | 100VAC to 240VAC, 50/60 Hz, 5 watts, external, auto-switchable; |
| to 12 to 24VAC or VDC, 0.20 A power supply.: Product requires 0.20 A (minimum). |
| (Order the power supply separately, part #70-055-01.) |
| Temperature/humidity | Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
| Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing |
| Rack mount | No |
| Furniture mount | Yes, or wall mount, with included hardware |
| Enclosure type | Metal |
| Enclosure dimensions — RGB 500, RGB 560 | |
| Faceplate | 4.5" H x 4.6" W x 0.1" D: (2-gang) |
| (11.4 cm H x 11.7 cm W x 0.3 cm D) |
| Interface enclosure | 2.5" H x 3.7" W x 1.75" D |
| (6.4 cm H x 9.4 cm W x 4.4 cm D) |
| (Depth excludes connectors and knobs.) |
| Enclosure dimensions — RGB 500 Dual, RGB 508, RGB 560 Dual, RGB 568 | |
| Faceplate | 4.5" H x 8.3" W x 0.1" D: (4-gang) |
| (11.4 cm H x 21.1 cm W x 0.3 cm D) |
| Interface enclosure | 2.5" H x 3.7" W x 1.75" D |
| (6.4 cm H x 9.4 cm W x 4.4 cm D) |
| (Depth excludes connectors and knobs.) |
| Enclosure dimensions — RGB 560 AKM | |
| Interface | 3.0" H x 8.2" W x 1.5" D |
| (7.62 cm H x 20.8 cm W x 3.8 cm D) |
| (Depth excludes connectors and knobs.) |
| Product weight | |
| RGB 500, RGB 508, RGB 560 | 0.7 lbs (0.3 kg) |
| RGB 568, RGB 560 AKM | 0.9 lbs (0.4 kg) |
| Shipping weight | RGB 500, RGB 560: 2 lbs (0.9 kg) |
| All other models: 3 lbs (1.4 kg) |
| Vibration | ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Listings | UL |
| Compliances | RGB 560 AKM: CE |
| All other models: CE, FCC Class A |
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |