| Video |
|---|
| Gain | 0.35V to 1.45V p-p |
| Bandwidth | 220 MHz (-3dB) |
| Video input |
|---|
| Number/signal type | 1 analog/ECL: RGBHV, RGBS, RGsB, RsGsBs |
| Connectors | 1: 9-pin male for MBC/LBC cable or buffer |
| Minimum/maximum levels | Analog: 0.3V to 1.45V p-p with no offset at unity gain |
| Impedance | 75 ohms or HiZ, switchable (set to 75 ohms if no local monitor is connected) |
| Horizontal frequency | Autoscan: 15 kHz to 125 kHz |
| Vertical frequency | Autoscan: 30 Hz to 120 Hz |
| LCD horizontal frequency | 10 kHz to 150 kHz |
| LCD vertical frequency | 30 Hz to 200 Hz |
| Return loss | -30dB @ 5 MHz |
| Maximum DC offset | 4.0V |
| Video output |
|---|
| Number/signal type | 1 analog RGBHV, RGBS, RGsB |
| Connectors | 5 BNC female |
| Minimum/maximum levels | 0.35V to 1.45V p-p with 0.7V p-p input |
| Impedance | 75 ohms |
| Return loss | -30dB @ 5 MHz |
| Sync |
|---|
| Input type | RGBHV TTL (±), RGBS TTL (±), RGsB (-) 0.3Vm RsGsBs (-) 1.3V |
| Output type | Autodetect: RGBHV (±), RGBS (±), RGsB (-) |
| Input level | 2V to 5.5V p-p with ±0.2VDC offset max. |
| Output level | 4V to 5V p-p |
| Input impedance | 10 kohms |
| Output impedance | 75 ohms |
| Input sensitivity | 0.3V to 5V p-p |
| Max. propagation delay | 48 nS |
| Max. rise/fall time | 3.5 nS |
| Polarity | RGBHV: when input is RGBHV, polarity follows input; |
| otherwise negative |
| RGBS, RGsB: negative |
| Audio |
|---|
| Gain | Unbalanced 0dB, balanced +6dB |
| Frequency response | 20 Hz to 20 kHz, ±0.05dB |
| THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output drive |
| S/N | >90dB at rated maximum output (14dBu), balanced |
| Stereo channel separation | >95dB @ 1 kHz to 20 kHz |
| Audio input |
|---|
| Number/signal type | 1 PC level stereo, unbalanced |
| Connectors | 1: 3.5 mm stereo jack, female (2 channel); tip (L), ring (R), sleeve (ground) |
| Impedance | >10 kohms unbalanced, DC coupled |
| Minimum level | 100mV |
| Maximum level | +8.5dBu, (balanced or unbalanced) at stated %THD+N |
| | |
| Audio output |
|---|
| Number/signal type | 1 stereo (2 channel), balanced/unbalanced |
| Connectors | 2: 3.5 mm stereo jacks, female, for left and right output |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±0.1dB channel to channel |
| Maximum level (600 ohm) | > +14dBm, balanced at stated %THD+N |
| Control/remote — interface |
|---|
| Serial control port | RS-232 , 9-pin female D connector |
| Baud rate and protocol | 9600, 8-bit, 1 stop bit, no parity |
| Serial control pin configurations | 2 = TX, 3 = RX, 5 = GND |
| Program control | Extron's control program for Windows® |
| Extron's Simple Instruction Set™ _ SIS™ |
| General |
|---|
| Power | 100VAC to 240VAC, 50/60 Hz, 15 watts,: internal, auto-switchable |
| MBC power jack | 9.0VDC, 150 mA |
| Temperature/humidity | Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
| Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing |
| Rack mount | Yes, with optional rack shelf, part #60-190-01 |
| Enclosure type | Metal |
| Enclosure dimensions | 1.75" H x 8.75" W x 9.5" D: (1U high, half rack width) |
| 4.45 cm H x 22.23 cm W x 24.13 cm D |
| (Depth excludes connectors.) |
| Product weight | 2.9 lbs (1.3 kg) |
| Shipping weight | 6 lbs (2.7 kg) |
| Vibration | ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Listings | UL |
| Compliances | CE, FCC Class A |
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |
| (7.3-102401-D1) | |