RGB 202 Rxi Retired

Two Input, Universal, Analog Interface with Audio and Enhanced ADSP™
Key Features
  • Compatible with VGA–QXGA, Mac, Sun®, and SGI® signals
  • 300 MHz (-3 dB) RGB video bandwidth
  • Enhanced ADSP™ - Advanced Digital Sync Processing
  • 30 memory locations for automatic signal setup
  • RS-232 control
The Extron RGB 202 Rxi
Model Version Description Part #
 RGB 202 Rxi Dual Input Analog Interface with Audio 60-327-01 Retired

This product has been retired.

Features

  • Inputs: RGB video on two male 9-pin D connectors; audio on two 3.5 mm stereo mini connectors
  • Output: RGB video on female BNC connectors for RGsB, RGBS, or RGBHV; audio on captive screw connector
  • Compatible with VGA–QXGA, Mac, Sun®, and SGI® signals
  • 300 MHz (-3 dB) RGB video bandwidth
  • Enhanced ADSP™ - Advanced Digital Sync Processing — Increased horizontal and vertical shift resolution for improved centering control.
  • 30 memory locations for automatic signal setup — Automatically recalls horizontal and vertical position settings for 30 different input signals.
  • RS-232 control
  • Active PC audio to balanced audio interfacing — Converts unbalanced PC audio to balanced line level audio for output on a captive screw connector.
  • Variable level and peaking — Boosts and equalizes video signals to compensate for signal loss and high frequency attenuation that occur in long cable runs.
  • DDSP™ - Digital Display Sync Processing — Allows the sync signal to pass through without altering sync pulse or width. Disables other sync processing features such as horizontal and vertical centering. DIP switch-selectable.
  • Vented, rack-mountable design — Housed in a compact 1U, half rack width rugged metal enclosure that can be rack or under-desk mounted.
  • Optional kits for under or through-desk mounting
  • Internal international power supply
  • Two 9VDC, 2.5 mm, MBC power jacks
OPTIONAL ACCESSORIES
  MBD 129 Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
  RSU 129 Universal Rack Shelf Kit for 9.5" Deep Products

Specifications

RGB 202 Rxi
Video
  Routing  2 x 1 router
  Gain  0.5 V to 1.45 Vp-p
  Bandwidth  300 MHz (-3 dB)
  Rise time  1.5 ns
Video input
  Number/signal type  2 analog RGBHV, RGBS, RGsB, RsGsBs
  Connectors  2 male 9-pin D for MBC/LBC cable or buffer
  Nominal level  0.7 Vp-p for RGB
  Minimum/maximum levels  Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain
  Impedance  75 ohms or high Z, switchable (set to 75 ohms if no local monitor is connected)
  Horizontal frequency  15 kHz to 150 kHz
  Vertical frequency  40 Hz to 140 Hz
  Return loss  <-30 dB @ 5 MHz
  DC offset (max. allowable)  4 V
Video output
  Number/signal type  1 analog RGBHV, RGBS, RGsB
  Connectors  6 BNC female
  Nominal level  0.7 Vp-p for RGB
  Minimum/maximum levels  0.3 V to 1.30 Vp-p with 0.7 Vp-p nominal input level
  Impedance  75 ohms
  Return loss  -30 dB @ 5 MHz
  DC offset  ±5 mV with input at 0 offset
Sync
  Input type  RGBHV, RGBS, RGsB, RsGsBs
  Output type  RGBHV, RGBS, RGsB
  Input level  2 V to 5.5 Vp-p with ±0.2 VDC offset max.
  Output level  TTL: 4 V to 5 Vp-p, unterminated
  Input impedance  510 ohms
  Output impedance  75 ohms
  Max. propagation delay  85 ns
  Max. rise/fall time  2 ns
  Polarity  RGBHV: tracks polarity (or force negative sync via DIP switch)
RGBS, RGsB: negative
Audio
  Routing  2 x 1 stereo router
  Gain  Unbalanced output: 0 dB; balanced output: +6 dB
  Frequency response  20 Hz to 20 kHz, ±0.05 dB
  THD + Noise  0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
  S/N  >90 dB at maximum output (17 dBu), balanced (unweighted)
  Crosstalk  <-90 dB @ 1 kHz, fully loaded
  Stereo channel separation  >90 dB @ 1 kHz
Audio input
  Number/signal type  2 PC level stereo, unbalanced
  Connectors  (2) 3.5 mm mini audio jacks (female, tip, ring, sleeve)
  Impedance  >10k ohms, unbalanced, DC coupled
  Nominal level  -10 dBV (316 mV)
  Maximum level  +8.5 dBu, (balanced or unbalanced) at 1% THD+N
   NOTE  0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV » 2 dBu
Audio output
  Number/signal type  1 buffered stereo (2 channel), balanced/unbalanced
  Connectors  (1) 3.5 mm captive screw connector, 5 pole
  Impedance  50 ohms unbalanced, 100 ohms balanced
  Gain error  ±0.1 dB channel to channel
  Maximum level (Hi-Z)  >+14 dBu, balanced at 1% THD+N
  Maximum level (600 ohm)  >+8.5 dBm, balanced at 1% THD+N
Control/remote — switcher/interface/scaler/Extron device
  Serial control port  RS-232, 9-pin female D connector (also used for contact closure)
  Baud rate and protocol  9600 baud, 8 data bits, 1 stop bit, no parity
  Serial control pin configurations  2 = TX, 3 = RX, 5 = GND
  Contact closure  (1) 9-pin female D connector (also used for RS-232)
  Contact closure pin configuration  1 = input #1, 4 = input #2, 5 = GND
  Program control  Extron's control/configuration program for Windows®
Extron's Simple Instruction Set (SIS™)
General
  Input power  100 VAC to 240 VAC, 50/60 Hz, 18 watts, internal, autoswitchable
  MBC power jacks  9.0 VDC, 0.15 A
  Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing
  Rack mount  Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01
Also furniture mountable with an optional under-desk mounting kit (part #70­‑077‑01) or through-desk mounting kit (part #70‑077‑02)
  Enclosure type  Metal, vented
  Enclosure dimensions  1.75" H x 8.75" W x 8.6" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 21.8 cm D
(Depth excludes knobs.)
  Product weight  2.2 lbs (1.0 kg)
  Shipping weight  5 lbs (3 kg)
  Vibration  ISTA 1A in carton (International Safe Transit Association)
  Listings  UL, CUL
  Compliances  CE, FCC Class A, VCCI, AS/NZS, ICES
  MTBF  30,000 hours
  Warranty  3 years parts and labor
   NOTE  All nominal levels are at ±10%.
   NOTE   Specifications are subject to change without notice.
(7.51-110405-D5)

Diagram

RGB 202 Rxi System Diagram

Panel Drawing

RGB 202 Rxi Panel Drawing