PI 130 New

High Power Injector for XTP and Pro Series Control Systems
Key Features
  • Supplies the required power to compatible PoE+ 802.3at devices and select XTP devices
  • Designed specifically for the high data rates of XTP Systems
  • No impact on signal quality
  • Patented ZipClip® 200 mounting kit included:
    - Mounts securely on a variety of surfaces, including rack rails, tables, lecterns, projector poles, and table legs
    - Wire tie slots for proper strain relief and dressing of excess cable
    - Quick release tab allows for easy installation and removal
  • Real-time status LEDs for troubleshooting and monitoring
  • UL/c-UL listed and CE compliant
The Extron PI 130
Model Version Description Part #
 PI 130 Single Port High Power Injector 60-1361-02

The Extron PI 130 is a single port high power injector that provides power to any PoE+ 802.3at compatible device, eliminating the need for a local power supply. Designed specifically for the high data rates of XTP Systems®, signal quality is unaffected when using the high power injector. For design flexibility, it can be installed anywhere within a signal path as well as in point-to-point applications. The compact enclosure of the power injector enables it to be installed in small spaces and the included Extron ZipClip® 200 mounting kit provides installation flexibility.

The unique 1U, quarter rack width enclosure features threaded inserts and recessed grooves for zip ties, allowing for easy mounting onto Extron rack shelves or oddly shaped supports, such as projector poles and rack rails. In addition, the patented Extron ZipClip 200 mounting kit offers further versatility to quickly and securely mount the PI 130 within lecterns, beneath tables, or into many other tight spaces.

Features

  • Supplies the required power to compatible PoE+ 802.3at devices and select XTP devices — Provides power for XTP transmitters and receivers, and Extron control systems, as well as any other PoE+ compatible product, eliminating the need for a local power supply.
  • Designed specifically for the high data rates of XTP Systems
  • No impact on signal quality — Utilization of the power injector does not impact video, audio, bidirectional RS-232 and IR, and Ethernet signal quality.
  • Patented ZipClip® 200 mounting kit included:
    - Mounts securely on a variety of surfaces, including rack rails, tables, lecterns, projector poles, and table legs
    - Wire tie slots for proper strain relief and dressing of excess cable
    - Quick release tab allows for easy installation and removal
  • Real-time status LEDs for troubleshooting and monitoring — The front LED is for status of AC power input. The rear LED indicates if power is delivered to the device.
  • UL/c-UL listed and CE compliant
  • 1U, quarter rack width enclosure
  • Extron Everlast™ power supply — Provides worldwide power compatibility, with high-demonstrated reliability and low power consumption for reduced operating cost.
  • Extron Everlast™ Power Supply is covered by a 7 year parts and labor warranty
SIMILAR PRODUCTS
  PI 115 Power Injector for XTP and Pro Series Control Systems
  XTP PI 400 Four Port Power Injector for XTP and Pro Series Control Systems

Specifications

PI 130
General
   Connectors 1 RJ-45 female connector for pass-through input
1 RJ-45 female connector for pass-through and power output
   Ethernet standards 10/100/1000Base-T
   Power supply Internal
Input: ​100-240 VAC, 50-60 Hz
   Power input 
      No load ​100 VAC to 240 VAC, 50-60 Hz, 0.8 watts
      Full power 100 VAC to 240 VAC, 50-60 Hz, 34.2 watts, 0.6 A maximum
   Power output 56 VDC, 0.5 A, 30 watts
​Compatible with 802.3at PoE+ devices
   Efficiency 
      At full load, 230 VAC 89.30%
      At full load, 100 VAC 87.70%
   Power consumption 
      No load 100 VAC to 240 VAC, 50-60 Hz, 0.86 watts
      Full load 100 VAC to 240 VAC, 50-60 Hz, 30 watts
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Rack mount Yes, with optional 1U rack shelf with the included ZipClip 200 mounting clip or by securing to rack rails with tie wraps
      Furniture mount Yes, with the included ZipClip 200 mounting clip
      Pole mount Yes, using tie wraps
   Enclosure type  High impact, high temperature plastic
   Enclosure dimensions 1.7" H x 4.3" W x 4.5" D (1U high, quarter rack wide)
(4.2 cm H x 11.0 cm W x 11.4 cm D)
   Product weight  0.6 lb (0.3 kg)
   Regulatory compliance 
      Safety, EMI/EMC CE, C-tick, c-UL, UL, CISPR 32, CISPR 35, FCC Class B, NEC Class 2
      Environmental Complies with the appropriate requirements of RoHS, WEEE.
   Product warranty 7 years parts and labor
    NOTE     Specifications are subject to change without notice.
(6017-D2)
Shipping Dimensions and Weights
    Part # Height Width Depth Weight
    60-1361-02 2.88" (7.3 cm) 10.38" (26.4 cm) 7.5" (19.1 cm) 1.6 lbs (0.73 kg)

Diagram

PI 130 Diagram

Panel Drawing

PI 130 Panel Drawing