P/2 DA2xi Retired

Two Output VGA-QXGA Distribution Amplifier
Key Features
  • 350 MHz (-3 dB) RGB bandwidth, fully loaded
  • Gain and peaking controls
  • Rack-mountable or portable
The Extron P/2 DA2xi
Model Version Description Part #
 P/2 DA2xi 1x2 VGA 60-506-01 Retired

This product has been retired.
Suggested Replacement
P/2 DA2xi

Features

  • Input: One female 15-pin HD connector
  • Outputs: Two female 15-pin HD connectors
  • 350 MHz (-3 dB) RGB bandwidth, fully loaded
  • Gain and peaking controls
  • Switchable sync output impedance
  • Power and source signal indicator
  • Includes detachable 6' (2 m) male-to-male VGA input cable
  • ID bits routed to local monitor output
  • Rack-mountable or portable
  • External international power supply included, part # 70-055-01

Note: Previous versions of this model could be powered via pin 9 of a computer's VGA connector. Extron has discontinued this feature in order to prevent interference with the operation of some computer graphic cards.

SIMILAR PRODUCTS
  P/2 DA2xi Two Output VGA Distribution Amplifier

Specifications

P/2 DA2xi Series
Video
  Gain  Selectable: 0.7 V (unity), or 0.75 V
  Peaking  Selectable: 0 dB or 6 dB @100 MHz
  Bandwidth  350 MHz (-3 dB)
Video input
  Number/signal type  1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs input
  Connectors  (1) 15-pin HD female
  Nominal level  0.7 Vp-p for RGB
  Minimum/maximum levels  Analog, 0.3 V to 1.5 Vp-p with no offset at unity gain
  Impedance  75 ohms
  Horizontal frequency  15 kHz to 135 kHz
  Vertical frequency  30 Hz to 170 Hz
  Return loss  <-38 dB @ 5 MHz
  DC offset (max. allowable)  1.0 V
  Input coupling  DC
Video output
  Number/signal type  1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs output
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through (i.d. bits are passed through)
  Connectors  (2) 15-pin HD female
  Nominal level  0.7 Vp-p for RGB at unity gain
  Minimum/maximum levels  Analog, 0.3 V to 1.5 Vp-p (follows input)
  Impedance  75 ohms
  Return loss  <-40 dB @ 5 MHz
  DC offset  ±5 mV with input at 0 offset
Sync
  Input type  RGBHV, RGBS, RGsB, RsGsBs
  Output type  RGBHV, RGBS, RGsB, RsGsBs
  Input level  1.5 V to 5.0 Vp-p
  Output level  TTL, 4 V to 5 Vp-p, unterminated
  Input impedance  510 ohms
  Output impedance  75 ohms or 55 ohms, switchable (output impedance resistors are 50 and 30 ohms)
  Max input voltage  5.0 Vp-p
  Max. propagation delay  60 ns
  Max. rise/fall time  4 ns
  Polarity  Positive or negative (follows input)
Audio — P/2 DA2xi MT only
  Gain  Unbalanced output: 0 dB; balanced output: +6 dB
  Frequency response  20 Hz to 20 kHz, +0.05 dB, -0.1 dB
  THD + Noise  0.03% @ 1 kHz at nominal level
  S/N  >90 dB (balanced) at maximum output
  Crosstalk  <-80 dB @ 1 kHz, fully loaded
  Stereo channel separation  >80 dB @ 1 kHz, >60 dB @ 20 kHz
  CMRR  >67 dB @ 20 Hz to 20 kHz
Audio input — P/2 DA2xi MT only
  Number/signal type  1 stereo, unbalanced
  Connectors  (1) 3.5 mm stereo jack, female; tip (L), ring (R), sleeve (GND)
  Impedance  >18k ohms unbalanced, DC coupled
  Nominal level  -10 dBV (316 mV)
  Maximum level  >+10 dBV (3.16 V) (unbalanced) at 1%THD+N
   NOTE  0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — P/2 DA2xi MT only
  Number/signal type  1 stereo, balanced/unbalanced
  Connectors  
(1) 3.5 mm captive screw connector,  5 pole
  Impedance  50 ohms unbalanced, 100 ohms balanced
  Gain error  ±0.1 dB channel to channel
  Nominal level  -2 dBu (632 mV) balanced output
-10 dBV (316 mV) unbalanced output
  Maximum level (Hi-Z)  >+15 dBu (4.36 V), balanced at 1% THD+N, with external power supply
  Maximum level (600 ohms)  >+9 dBm (2.18 V), balanced at 1% THD+N, with external power supply
General
  Power  Supplied by an external power supply
  External power supply  100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A, regulated
  Power input requirements  12 VDC
        P/2 DA2x  0.1 A
        P/2 DA2xi MT  0.2 A
  Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
  Rack mount  Yes, with optional 1U rack shelf, part #60-190-01or 60-604-01; or VersaTools® rack shelf, part #60-190-20 or 60-604-20;
also under-furniture mountable with optional brackets #70-077-01 (optional for P/2 DA2xi, standard for P/2 DA2xi MT)
or projector mountable with bracket kit #70-077-04
  Enclosure type  Metal
  Enclosure dimensions  1.0" H x 4.3" W x 3.0" D (quarter rack wide)
2.5 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
  Product weight  0.5 lbs (0.3 kg)
  Shipping weight  3 lbs (2 kg)
  Vibration  ISTA 1A in carton (International Safe Transit Association)
  Listings  UL, CUL
  Compliances  CE, FCC Class A, VCCI, AS/NZS, ICES
  MTBF  30,000 hours
  Warranty  3 years parts and labor
   NOTE  All nominal levels are at ±10%.
   NOTE   Specifications are subject to change without notice.
(7.52-060206-D6)

Diagram

P/2 DA2xi System Diagram

Panel Drawing

P/2 DA2xi Panel Drawing