MPS 601 |
|
|
Frame rate1 | 24, 25, 30, 50, or 60 fps |
Chroma sampling1 | 4:4:4, 4:2:2, or 4:2:0 |
Color bit depth1 | 8 bits per color |
Signal Type | DVI 1.0, HDMI 1.4, HDCP 1.4 |
Max. video data rate1 | 10.2 Gbps (3.4 Gbps per color) |
NOTE | 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate. |
|
NOTE | The MPS 601 must have firmware version 1.04 or greater for 4K support. |
|
|
Video |
VGA inputs | |
Gain | Unity |
Resolution | 640x480 @ 60 Hz to 2048x1080 @ 60 Hz |
HDMI inputs | |
Maximum data rate | 10.2 Gbps (3.4 Gbp per color) |
Maximum pixel clock | 297 MHz |
Resolution | Up to 1920x1200 @ 60 Hz, or 1080p @ 60 Hz and 2K, 12-bit color, 4K (4096x2160) @ 30 Hz or 4K UHD (3840 x 2160) @ 30Hz, 8-bit color |
Formats | RGB and YCbCr digital video |
Standards | DVI 1.0, HDMI 1.4, HDCP 1.4 |
NOTE | The MPS 601 supports TMDS bit rates up to 10.2 Gbps, deep color up to 12-bit, 3D**, HD lossless audio, and other HDMI specification features.
** Extron strongly recommends compatibility testing while designing, and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The level of 3D product support is governed by pixel clock, signal format, and communication between source and sink devices. Please contact an Extron Application Engineer for more information.
|
|
|
Video input |
Number/signal type | |
VGA inputs | 2 VGA-QXGA, RGBHV, RGBS |
HDMI inputs | 4 single link HDMI (or DVI-D) |
Connectors | |
VGA inputs | 2 female 15 pin HD |
HDMI inputs | 4 female HDMI, type A |
Nominal level | |
VGA inputs | 0.7 Vp-p for RGB |
Minimum/maximum levels | |
VGA inputs | Analog 0.3 V to 1.5 Vp-p with no offset |
Impedance | 75 ohms |
Return loss | <-35 dB @ 5 MHz |
Equalization | Automatic. Input cable <50' (15 m) for resolutions up to 4K 4096x2160 @ 30Hz, 8-bit color using Extron HDMI Pro Series cable |
NOTE | The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. |
|
|
Video output |
Number/signal type | 1 HDMI (or single link DVI-D) |
Connectors | 1 female HDMI type A |
Re-clocking | Automatic |
Peripheral device power | 200 mA per output |
|
Sync — VGA |
Input type | RGBHV, RGBS |
Input level | 1.9 V to 5.0 Vp-p |
Input impedance | 510 ohms |
Max. input voltage | 5.0 Vp-p |
Max. propagation delay | 30 ns |
Max. rise/fall time | 4.2 ns |
Polarity | Positive or negative (follows input) |
|
Audio input |
Number/signal type | 2 stereo, unbalanced |
Connectors | (2) 3.5 mm, stereo mini jacks; tip (L), ring (R), sleeve (Gnd) |
Input impedance | >10k ohms unbalanced, DC coupled |
Nominal level | -10 dBV (316 mVrms) |
Maximum level | +7 dBV, unbalanced |
NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Communications |
Serial control port | 1 RS-232, 3.5 mm captive screw connector, 3-pole, rear panel |
Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
Contact closure | (6) 3.5 mm captive screw connectors, 3-pole, shared with tally outputs |
Tally output | (6) 3.5 mm captive screw connectors, 3-pole, shared with contact closure |
Tally output power | +5 VDC, 0.2 A |
USB control ports | 1 front panel female mini USB, type B |
USB standards | USB 2.0, low speed |
Program control | Extron PCS Software for Windows, Extron Simple Instruction Set (SIS™) |
|
General |
Power supply | External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 watts |
Power consumption | |
Device | 3.9 watts at 12 VDC |
Device and power supply | 5.3 watts at 12 VDC |
Ambient temperature/humidity | Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling | Convection, side vents |
Thermal dissipation | |
Device | 7.4 BTU/hr |
Device and power supply | 12.3 BTU/hr |
Mounting | |
Rack mount | Yes, with optional 1U rack shelf |
Furniture mount | Yes, with optional under-desk mounting kit or through-desk mounting kit |
Enclosure type | Metal |
Enclosure dimensions | 1.75" H x 8.75" W x 6.0" D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 15.2 cm D
(Depth excludes connectors.) |
Product weight | 1.0 lbs (0.5 kg) |
Regulatory compliance | CE, C-tick, c-UL, UL, FCC Class A, VCCI, ICES |
Product warranty | 3 years parts and labor |
Everlast power supply warranty | 7 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(4344-D5) |