MGP 641 xi Series |
|
specification |
|
Frame rate1 | 24, 25, 30, 50, or 60 fps |
Chroma sampling1 | 4:4:4, 4:2:2, 4:2:0 |
Color bit depth1 | 8 or 10 bits per color |
Signal Type | DVI 1.0, HDMI 2.0, HDCP 1.4 and 2.3, 6G-SDI, 12G-SDI |
Max. video data rate1 | |
HDMI | 18 Gbps (6 Gbps per color) |
SDI | 11.88 Gbps per SDI connection |
NOTE | • 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/8Kdatarate to
determine video parameters supported by this data rate.
• 24096 x 2160/50-60 at 4:4:4 is available only for HDMI connections. |
|
|
Video input |
Number/signal type | 4 HDMI/DVI
1 HDMI/DVI (Live Background)
4 12G/6G/3G/HD/SD SDI (SDI model only) |
Connectors | 4 female HDMI type A
1 female HDMI type A (Live Background)
4 female BNC (SDI model only) |
Horizontal frequency | 15 kHz to 270 kHz |
Vertical frequency | 24 Hz to 240 Hz |
Resolution range | 640x480 to 4096x2160, 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 2K, 3840x2160 (up to 60 Hz), 4096x2160 (up to 60 Hz) |
Standards | DVI 1.0, HDMI 2.0, HDCP 1.4 and 2.3, SMPTE 259M-C, SMPTE 292M, SMPTE 424M, SMPTE 2081, SMPTE 2082 |
|
Video processing |
Digital sampling | 30 bit, 10 bits per color, 600 MHz pixel clock maximum |
Maximum video data rate | 17.82 Gbps (5.94 Gbps per color) |
Colors | 1 billion (10 bit processing with full 4:4:4 sampling) |
|
Logos |
Number of logos | 32 |
Resolution range | Up to 4096x2160 |
Image file formats | BMP, JPG, PNG, TIFF (TIFF files using JPEG compression are not supported.) |
Logo effects | Transparency, RGB key, level key |
|
Video output |
Number/signal type | 1 HDMI/DVI
1 DTP3/XTP/HDBT configurable |
Connectors | 1 female HDMI type A
1 female RJ-45 |
Power for active cables | 250 mA for the HDMI output |
Vertical frequencies | 23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 50 Hz, 59.94 Hz, 60 Hz, 75 Hz |
Scaled resolution | 640x480, 800x600, 1024x768, 1280x768, 1280x800, 1280x1024, 1360x768, 1366x768, 1440x900, 1600x900, 1400x1050, 1680x1050, 1600x1200, 1920x1200, 2048x1200, 2048x1536, 2560x1080, 2560x1440, 2560x1600
480p, 576p, 720p, 1080i, 1080p, 2048x1080, 3840x2160, 4096x2160 |
Standards | DVI 1.0, HDMI 2.0, HDCP 1.4, and HDCP 2.3 |
|
Audio |
Frequency response | 20 Hz to 20 kHz, ± 0.5 dB |
THD + Noise | <0.1% @ 1 kHz, 20 kHz bandwidth at nominal level |
S/N | >90 dB, at maximum output (unweighted) |
Crosstalk | ≤-80 dB @ 1 kHz fully loaded |
Stereo channel separation | >80 dB @ 1 kHz |
Supported formats | |
Analog de-embedding | LPCM-2Ch |
HDMI pass-through | LPCM up to 7.2/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0, Dolby Atmos 7.2, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2-channel |
SDI audio | SDI embedded audio, up to 8 channels |
|
Audio input |
Number/signal type | 5 HDMI embedded audio (including HDMI background input)
4 SDI embedded audio (SDI model only) |
Connectors | 5 female HDMI
4 female BNC, SDI (SDI model only) |
|
Audio output |
Number/signal type | 1 balanced or unbalanced stereo (stereo or dual mono channels)
1 HDMI, embedded
1 DTP3/XTP/HDBT (embedded digital and remote balanced/unbalanced analog**)
**Available only in DTP mode |
Connectors | (1) 3.5 mm captive screw, 5-pole
1 female HDMI
1 female RJ-45 |
Impedance | 50 ohms unbalanced, 100 ohms balanced
|
Gain error | ±0.5 dB channel to channel |
Maximum level (Hi-Z) | >+21 dBu balanced, >+15 dBV unbalanced |
|
Interconnection between MGP and DTP/HDBT receiver |
Termination standard | TIA/EIA T568B |
Signal transmission distance | |
4096x2160 @ 60 Hz | Up to 330' (100 m) using shielded twisted pair (STP) cable or XTP DTP 22 STP cable |
Cable requirements | Solid conductor, 22 AWG or better |
Cable recommendations | 500 MHz bandwidth, STP |
NOTE | Extron XTP DTP 22 shielded twisted pair cable is strongly recommended for optimal performance. |
|
|
Control/remote |
Serial control port | 1 RS-232 on captive screw connector on back panel |
Baud rate and protocol | 9600, 8-bit, 1 stop bit, no parity (default) |
Serial control pin configuration | 1 = Tx, 2 = Rx, 3 = GND |
Ethernet control port | 1 female RJ-45 connector |
Ethernet data rate | 10/100/1000Base-T, half and full duplex with auto detect |
Ethernet protocols | ARP, DHCP, DNS, HTTP (redirect), HTTPS, IEEE 802.1X, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, Telnet, UDP/IP |
Memory | 4 GB flash |
USB control port | 1 USB, female USB-C on front panel |
USB version | USB 2.0 |
USB protocols | Ethernet over USB (RNDIS), ECM, IPv4, USB Suspend |
Program control | Extron Simple Instruction Set™ (SIS™)
Extron internal web pages
Extron Videowall Configuration Software (VCS) for Windows®
Extron Toolbelt™ software |
|
Control/remote — external device (RS-232/IR over TP) |
NOTE | RS-232 can be transmitted to and from DTP/XTP/HDBT Tx via Ethernet insertion only. |
|
Baud rates | 9600 to 115200 |
Protocol | 6-8 data bits
1 or 2 stop bits
Odd, even, or no parity
XON, XOFF, or no flow control |
|
USB device ports |
Number/signal type | 2 USB devices (only one touchpanel supported) |
Connectors | 2 female USB 3.2 type A |
USB standards | USB 3.0, USB 2.0, USB 1.1, USB 1.0 compatible |
USB data rates | Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps), SuperSpeed (5 Gbps) |
|
General |
Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
Power consumption | |
MGP 641 xi | 141 watts |
MGP 641 xi SDI | 144 watts |
Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing |
Cooling | Fans, right to left (as viewed from the front panel) |
Thermal dissipation | |
MGP 641 xi | 423 BTU/hr |
MGP 641 xi SDI | 432 BTU/hr |
Mounting | Rack mountable |
Enclosure type | Metal |
Enclosure dimensions (per unit) | 1.75" H x 17.5" W x 12.0" D (1U high, full rack wide)
(44 mm H x 445 mm W x 305 mm D)
(Depth excludes connectors and knobs. Width excludes rack ears.) |
Product weight | 6.9 lbs (3.1 kg) |
Regulatory compliance | CE, c-UL, UL, C-tick, FCC Class A, ICES, KC, VCCI, RoHs, and WEEE |
Product warranty | 3 years parts and labor |
Everlast power supply warranty | 7 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(6146-D4) |