ISM MTP UT 4DA Retired

Universal MTP Twisted Pair Transmitter with Four Output DA for ISM 824

Key Features

Transmits video, audio, and control signals 600 feet (185 meters) or more on a single CAT 5/5e/6 or Extron Skew-Free™ UTP cable
Integrated 4-output distribution amplifier
Selectable pre-peaking on all outputs
Local RS-232 insertion ports for each pair of outputs
Local stereo audio output

Model	Version Description	Part #
ISM MTP UT 4DA	Twisted Pair Output Board for ISM 824	70-819-01	Retired

This product has been retired.

The ISM MTP UT 4DA output board adds MTP Twisted Pair series transmission capability to the ISM 824. It transmits video, audio, and control signals up to 600 feet (185 meters) on a single CAT 5/5e/6 or Skew-free UTP cable. Also, as a universal transmitter, it supports all input signal types in mixed-signal routing applications. The ISM MTP UT 4DA accepts any video input signal type and outputs it as four identical twisted pair signals for connection to MTP Series twisted pair receivers, including MTP U R universal receivers.

The ISM MTP UT 4DA features local RS-232 insertion ports, which eliminate the need for additional control system infrastructure to support remote displays, while overcoming the 100 foot (30 m) distance limitation for RS-232 signals. The integrated, four-output MTP distribution amplifier simplifies system design and eliminates the cost of an outboard DA in applications where multiple remote displays must receive the same input signal simultaneously.

Features

Transmits video, audio, and control signals 600 feet (185 meters) or more on a single CAT 5/5e/6 or Extron Skew-Free™ UTP cable — Long distance transmission of video, audio, and control signals on low-cost UTP cable.

Integrated 4-output distribution amplifier — Splits the input signal into four identical outputs, eliminating the need for and cost of an additional DA for simultaneous-display applications.

Selectable pre-peaking on all outputs — Provides additional compensation for signal loss over long cable runs.

Local RS-232 insertion ports for each pair of outputs — Replaces the separate control system infrastructure required to support remote displays.

Local stereo audio output — Provides direct connection for local audio system and monitoring needs.

Compatible with Extron MTP Series products, including MTP U Series Universal Receivers — A single output supports all input signal types in mixed-signal routing applications.

SIMILAR PRODUCTS
	FPC 6000	Front Panel Controller for FOX and FOX3 Matrix Switchers
	MKP 2000	X-Y Remote Control Panel for Extron Matrix Switchers

SIMILAR PRODUCTS

FPC 6000

Front Panel Controller for FOX and FOX3 Matrix Switchers

MKP 2000

X-Y Remote Control Panel for Extron Matrix Switchers

Specifications

ISM 824

Video

Routing

8 x 2 matrix up to 8 x 8 matrix, depending on model and configuration

Gain

Unity (outputs 1 and 2)

Bandwidth

450 MHz (-3 dB), fully loaded (main unit, outputs 1 and 2)
350 MHz (-3 dB) for wideband single/dual boards

Crosstalk

-80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz (outputs 1 and 2)

Switching speed

200 ns (max.) (outputs 1 and 2)

Video input — main unit

Number/signal type

8 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (interlaced or progressive), S-video, composite video

Connectors

8 x 5 female BNC

Nominal level

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

Analog: 0.5 V to 2.0 Vp-p with no offset at unity gain

Impedance

75 ohms

Horizontal frequency

15 kHz to 108 kHz

Vertical frequency

50 Hz to 120 Hz

Return loss

<-30 dB @ 5 MHz

DC offset (max. allowable)

1.0 V

Sync — main unit

Input type

RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video

Output type

RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video (follows input) (outputs 1 and 2)

Standards

NTSC 3.58, PAL

Input level

0.5 V to 5.0 Vp-p, 4.0 Vp-p normal

Output level

AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated

Input impedance

510 ohms

Output impedance

75 ohms

Max. input voltage

5.0 Vp-p

Max. propagation delay

15 ns, input channel to channel

Max. rise/fall time

4 ns

Polarity

Positive or negative (follows input)

Video processing — ISM RGB

Digital sampling

24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)

Colors

16.78 million

Video output — ISM RGB scaled output

Number/signal type

1 scaled or pass-through RGBHV, RGBS, RGsB, HD YUV component video

Connectors

1 x 5 female BNC

Nominal level

1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels

0.0 V to 0.7 Vp-p for RGB 0.0 V to 1.0 Vp-p for component video and G of RGsB

Impedance

75 ohms

Scaled resolution

640x480^1,2,3,4,5,6, 800x600^1,2,3,4,5,6, 852x480^1,2,3,4,5, 1024x768^1,2,3,4, 1024x852^1,2,3,4, 1024x1024^1,2,3, 1280x768^1,2,3,4, 1280x800^1,2, 1280x1024^1,2,3, 1360x765^1,2,3, 1360x768^1,2,3, 1365x1024^1,2, 1366x768^1,2,3, 1400x1050^1,2, 1440x900^2,7, 1600x1200^1,2, 1680x1050², 1920x1200²
HDTV: 480p^2,8, 576p^1,5, 720p^1,2,8, 1080p^1,2,8, 1080i^1,2,8, 1080p Sharp
¹ = at 50 Hz, ⁸ = at 59.94 Hz, ² = at 60 Hz, ³ = at 72 Hz, ⁷= at 75 Hz, ⁴ = at 96 Hz, ⁵= at 100 Hz ⁶ = at 120 Hz

Sync — ISM RGB

Output type

RGBHV, RGBS, RGsB
Bi-level or tri-level on Y, R-Y, B-Y channels (component video)

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Output level

TTL: 5.0 Vp-p, unterminated

Output impedance

75 ohms

Polarity

Positive or negative (switch selectable)

Video processing — ISM VS

Digital sampling

24 bit, 8 bits per color: 13.5 MHz standard (video)

Colors

16.78 million

Video output — ISM VS scaled output

Number/signal type

1 scaled RGBHV, RGBS, RGsB, HD YUV component video

Connectors

1 x 5 female BNC

Nominal level

1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels

0.0 V to 1.0 Vp-p

Impedance

75 ohms

Scaled resolution

640x480^1,2, 800x600^1,2, 852x480^1,2, 1024x768^1,2, 1280x768^1,2, 1280x1024^1,2, 1360x765^1,2, 1360x768^1,2,1365x1024^1,2, 1366x768^1,2,1400x1050^1,2
HDTV: 480p², 576p¹, 720p^1,2, 1080p^1,2, and 1080i^1,2
1= at 50 Hz, ² = at 60 Hz

Sync — ISM VS

Input type

Pass-through RGBHV, RGBS, RGsB

Output type

RGBHV, RGBS, RGsB
Bi-level on Y, R-Y, B-Y channels (component video)

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Output level

TTL: 5.0 Vp-p, unterminated

Output impedance

75 ohms

Max. input voltage

5.0 Vp-p

Max. propagation delay

30 ns (RGB pass-through)

Video output — wideband outputs:

• Main unit outputs 1 and 2 (pass-through)

• ISM 1WB single-output wideband board

• ISM 2WB dual-output wideband board

Number/signal type

RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (progressive/interlaced), S-video, composite video (follows input type)

Connectors

Wideband (main unit)

2 x 5 female BNC

ISM 1WB

1 x 5 female BNC

ISM 2WB

2 female 15-pin HD

Nominal level

1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video

Minimum/maximum levels

0.0 V to 0.7 Vp-p (follows input)

Video processing — ISM DVI

Digital sampling

24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)

Colors

16.78 million

Video output — ISM DVI scaled output

Number/signal type

1 scaled DVI-D

Connector

1 female DVI-D

Nominal level

0.8 Vp-p

Impedance

75 ohms

Scaled resolution

640x480^4,5,6, 800x600^4,5,6, 852x480^4,5,6, 1024x768^4,5,6, 1024x852^4,5,6, 1024x1024^4,5,6, 1280x768^4,5,6, 1280x800^4,5, 1280x1024^4,5,6, 1360x765^4,5,6, 1365x768^4,5,6, 1365x1024^4,5,6, 1366x768^4,5,6, 1400x1050^4,5, 1440x900^5,7, 1600x1200^4,5, 1680x1050⁵, 1920x1200⁵
HDTV: 480p^5,8, 576p⁴, 720p^4,5,8, 1080i^4,5,8, 1080p^1,2,3,4,5,8, 1080p Sharp
¹= 24 Hz, ⁸ = at 59.94 Hz, ² = 25 Hz, ³ = 30 Hz, ⁴ = 50 Hz, ⁵ = 60 Hz, ⁶ = 72 Hz, ⁷ = 75 Hz

Video processing — ISM HDSDI

Digital sampling

24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)

Colors

16.78 million

Video output — ISM HDSDI scaled outputs

Number/signal type

1 scaled HD-SDI (SMPTE 292M)

Connector

1 female BNC

Nominal level

0.8 Vp-p

Impedance

75 ohms

Scaled resolution

720p^1,2,3,^4,5,6, 1080i^4,5,6, 1080p^1,2,3
¹= 24 Hz, ² = 25 Hz, ³= 30 Hz, ⁴= 50 Hz, ⁵= 59.94 Hz, ⁶= 60 Hz

Video — ISM MTP UT 4DA

Gain

Unity

Video output — ISM MTP UT 4DA

Number/signal type

4 sets of proprietary analog signals

Connectors

4 female RJ-45

Maximum resolution

1920x1200

Video — ISM SC

Digital sampling

24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)

Colors

16.78 million

Horizontal filtering

4 levels

Flicker filtering

4 levels

Video output — ISM SC

Number/signal type

1 NTSC/PAL RGsB, component video (with bi-level sync), or S-video
1 NTSC/PAL composite video

Connectors

3 female BNC
1 female BNC

Nominal levels

1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video

Minimum/maximum levels

0.0 V to 1.0 Vp-p (follows input)

Impedance

75 ohms

Sync — ISM SC

Output type

RGsB, bi-level for component video

Standards

NTSC 3.58, PAL

Output impedance

75 ohms

Output level

NTSC or PAL standard levels

Audio — main unit

Gain

Unbalanced output: -6 dB
Balanced output: 0 dB

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

0.03% @ 1 kHz at nominal level, 0 dB gain

S/N

>90 dB, at maximum rated output drive

Crosstalk

<80 dB @ 1 kHz, fully loaded

Stereo channel separation

>90 dB @ 1 kHz

CMRR

>75 dB @ 20 Hz to 20 kHz

Audio — ISM MTP UT 4DA

Number/signal type

4 sets of proprietary signals

Connectors

4 female RJ-45 (shared with video)

Gain

Unbalanced output: 0 dB (unity; balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±1 dB

THD + Noise

0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level

S/N

>70 dB at maximum output (unweighted)

CMRR

<-43 dB @ 20 Hz to 20 kHz

Audio input — main unit

Number/signal type

8 stereo, balanced/unbalanced

Connectors

(8) 3.5 mm captive screw connectors, 5 pole

Impedance

>10k ohms, balanced/unbalanced, DC coupled

Nominal level

+4 dBu (1.23 V), -10 dBV (316 mV)

Maximum level

+19.5 dBu, (balanced or unbalanced) at 1% THD+N

Input gain adjustment

-18 dB to +24 dB

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — main unit

Number/signal type

2 (base model, upgradeable to 8) stereo, balanced/unbalanced

Connectors

(2, upgradeable to 8) 3.5 mm captive screw connectors, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.5 dB channel to channel

Maximum level (Hi-Z)

>+21 dBu balanced or >+15 dBu unbalanced at 1% THD+N

Maximum level (600 ohm)

>+15 dBu, balanced or unbalanced, at stated 1% THD+N

Output volume range

0 to 64 (-64 dB to 0 dB) increments from steps 1 through 64

Control/remote — switcher

Serial host control port

1 rear panel RS-232 or RS-422, female 9-pin D connector
1 front panel RS-232 2.5 mm mini stereo jack

Baud rate and protocol

9600 baud, 8 data bits, 1 stop bit, no parity

Serial control pin configurations

9-pin D connector

RS-232: 2 = TX, 3 = RX, 5 = GND
RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = TX+, 8 = RX+

2.5 mm mini stereo jack

RS-232: tip = TX, ring = RX, sleeve = GND

Ethernet control port

1 female RJ-45 connector

Ethernet data rate

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

ARP, ICMP (ping), IP, TCP, HTTP, Telnet

Default settings

Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off

Program control

Extron control/configuration program for Windows^®
Extron Simple Instruction Set (SIS^™)
Microsoft^® Internet Explorer^® ver. 6 or higher, Netscape Navigator, Telnet

Control/remote — ISM MTP UT 4DA (pass-through)

Serial control

4 RS-232 on (2) 3.5 mm captive screw connectors, 3 pole:
2 bidirectional (via outputs 1 and 3), 2 unidirectional (via outputs 2 and 4)

Serial control pin configuration

1 = TX, 2 = RX, 3 = GND

Baud rates

Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance will vary based on baud rate and cable length.)

Protocol

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none

NOTE	Protocol is mirrored between the transmitter board and the receiver.

General

Power

100 VAC to 240 VAC, 50-60 Hz, 75 watts, internal

Ambient temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Fan, left to right (as viewed from the front panel)

Mounting

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

5.25" H x 17.5" W x 11.2" D (3U high, full rack wide)
(13.3 cm H x 44.4 cm W x 28.4 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)

Product weight

Main unit

14 lbs (6.3 kg)

Optional boards

0.5 lbs (0.3 kg)

Shipping weight

Main unit

21 lbs (10 kg)

Optional boards

1 lb (1 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Product warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(7.6-092409-D9)