ISM 2WB Retired

Dual Output Wideband Board with 15-pin HD Connectors for ISM 824
Key Features
  • Provides two additional, configurable wideband outputs for the ISM 824
  • RGB outputs on 15-pin HD connectors
  • Outputs stereo audio on captive screw connectors
The Extron ISM 2WB
Model Version Description Part #
 ISM 2WB Dual Output Wideband Board for ISM 824 70-547-02 Retired

This product has been retired.

The ISM 2WB is a dual-output wideband board with two 15-pin HD connectors for the ISM 824. It provides two additional, configurable wideband outputs for expanding matrix switching capability. The ISM 2WB also features two balanced or unbalanced stereo audio outputs.

Features

  • Provides two additional, configurable wideband outputs for the ISM 824
  • RGB outputs on 15-pin HD connectors
  • Outputs stereo audio on captive screw connectors
SIMILAR PRODUCTS
  FPC 6000 Front Panel Controller for FOX and FOX3 Matrix Switchers
  MKP 2000 X-Y Remote Control Panel for Extron Matrix Switchers

Specifications

ISM 824
Video
   Routing 8 x 2 matrix up to 8 x 8 matrix, depending on model and configuration
   Gain Unity (outputs 1 and 2)
   Bandwidth 450 MHz (-3 dB), fully loaded (main unit, outputs 1 and 2)
350 MHz (-3 dB) for wideband single/dual boards
   Crosstalk -80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz (outputs 1 and 2)
   Switching speed 200 ns (max.) (outputs 1 and 2)
Video input — main unit
   Number/signal type 8 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (interlaced or progressive), S-video, composite video
   Connectors 8 x 5 female BNC
   Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.5 V to 2.0 Vp-p with no offset at unity gain
   Impedance 75 ohms
   Horizontal frequency 15 kHz to 108 kHz
   Vertical frequency 50 Hz to 120 Hz
   Return loss <-30 dB @ 5 MHz
   DC offset (max. allowable) 1.0 V
Sync — main unit
   Input type RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video
   Output type RGBHV, RGBS, RGsB, RsGsBs, bi-level or tri-level for component video (follows input) (outputs 1 and 2)
   Standards NTSC 3.58, PAL
   Input level 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
   Output level AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
   Input impedance 510 ohms
   Output impedance 75 ohms
   Max. input voltage 5.0 Vp-p
   Max. propagation delay 15 ns, input channel to channel
   Max. rise/fall time 4 ns
   Polarity Positive or negative (follows input)
Video processing — ISM RGB
   Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
   Colors 16.78 million
Video output — ISM RGB scaled output
   Number/signal type 1 scaled or pass-through RGBHV, RGBS, RGsB, HD YUV component video
   Connectors 1 x 5 female BNC
   Nominal level 1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels 0.0 V to 0.7 Vp-p for RGB 0.0 V to 1.0 Vp-p for component video and G of RGsB
   Impedance 75 ohms
   Scaled resolution 640x4801,2,3,4,5,6, 800x6001,2,3,4,5,6, 852x4801,2,3,4,5, 1024x7681,2,3,4, 1024x8521,2,3,4, 1024x10241,2,3, 1280x7681,2,3,4, 1280x8001,2,  1280x10241,2,3, 1360x7651,2,3, 1360x7681,2,3, 1365x10241,2, 1366x7681,2,3, 1400x10501,2, 1440x9002,7, 1600x12001,2, 1680x10502, 1920x12002
HDTV: 480p2,8, 576p1,5, 720p1,2,8, 1080p1,2,8, 1080i1,2,8, 1080p Sharp
1 = at 50 Hz, 8 = at 59.94 Hz, 2 = at 60 Hz, 3 = at 72 Hz, 7 = at 75 Hz, 4 = at 96 Hz, 5 = at 100 Hz 6 = at 120 Hz
Sync — ISM RGB
   Output type RGBHV, RGBS, RGsB
Bi-level or tri-level on Y, R-Y, B-Y channels (component video)
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Output level TTL: 5.0 Vp-p, unterminated
   Output impedance 75 ohms
   Polarity Positive or negative (switch selectable)
Video processing — ISM VS
   Digital sampling 24 bit, 8 bits per color: 13.5 MHz standard (video)
   Colors 16.78 million
Video output — ISM VS scaled output
   Number/signal type 1 scaled RGBHV, RGBS, RGsB, HD YUV component video
   Connectors 1 x 5 female BNC
   Nominal level 1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
   Minimum/maximum levels 0.0 V to 1.0 Vp-p
   Impedance 75 ohms
   Scaled resolution 640x4801,2, 800x6001,2, 852x4801,2, 1024x7681,2, 1280x7681,2, 1280x10241,2, 1360x7651,2, 1360x7681,2, 1365x10241,2, 1366x7681,2, 1400x10501,2
 HDTV: 480p2, 576p1, 720p1,2, 1080p1,2, and 1080i1,2
1 = at 50 Hz, 2 = at 60 Hz
Sync — ISM VS
   Input type Pass-through RGBHV, RGBS, RGsB
   Output type RGBHV, RGBS, RGsB
Bi-level on Y, R-Y, B-Y channels (component video)
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
   Output level TTL: 5.0 Vp-p, unterminated
   Output impedance 75 ohms
   Max. input voltage 5.0 Vp-p
   Max. propagation delay 30 ns (RGB pass-through)
Video output — wideband outputs:
   • Main unit outputs 1 and 2 (pass-through)  
   • ISM 1WB single-output wideband board 
   • ISM 2WB dual-output wideband board 
   Number/signal type RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (progressive/interlaced), S-video, composite video (follows input type)
   Connectors 
      Wideband (main unit) 2 x 5 female BNC
      ISM 1WB 1 x 5 female BNC
      ISM 2WB 2 female 15-pin HD
   Nominal level 1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video
   Minimum/maximum levels 0.0 V to 0.7 Vp-p (follows input)
Video processing — ISM DVI
   Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
   Colors 16.78 million
Video output — ISM DVI scaled output
   Number/signal type 1 scaled DVI-D
   Connector 1 female DVI-D
   Nominal level 0.8 Vp-p
   Impedance 75 ohms
   Scaled resolution 640x4804,5,6, 800x6004,5,6, 852x4804,5,6, 1024x7684,5,6, 1024x8524,5,6, 1024x10244,5,6, 1280x7684,5,6, 1280x8004,5, 1280x10244,5,6, 1360x7654,5,6, 1365x7684,5,6, 1365x10244,5,6, 1366x7684,5,6, 1400x10504,5, 1440x9005,7, 1600x12004,5, 1680x10505, 1920x12005
HDTV: 480p5,8, 576p4, 720p4,5,8, 1080i4,5,8, 1080p1,2,3,4,5,8, 1080p Sharp
1 = 24 Hz, 8 = at 59.94 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz, 5 = 60 Hz, 6 = 72 Hz, 7 = 75 Hz
Video processing — ISM HDSDI
   Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
   Colors 16.78 million
Video output — ISM HDSDI scaled outputs
   Number/signal type 1 scaled HD-SDI (SMPTE 292M)
   Connector 1 female BNC
   Nominal level 0.8 Vp-p
   Impedance 75 ohms
   Scaled resolution 720p1,2,3,4,5,6, 1080i4,5,6, 1080p1,2,3
1 = 24 Hz, 2 = 25 Hz, 3 = 30 Hz, 4 = 50 Hz, 5 = 59.94 Hz, 6 = 60 Hz
Video — ISM MTP UT 4DA
   Gain Unity
Video output — ISM MTP UT 4DA
   Number/signal type 4 sets of proprietary analog signals
   Connectors 4 female RJ-45
   Maximum resolution 1920x1200
Video — ISM SC
   Digital sampling 24 bit, 8 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB)
   Colors 16.78 million
   Horizontal filtering 4 levels
   Flicker filtering 4 levels
Video output — ISM SC
   Number/signal type 1 NTSC/PAL RGsB, component video (with bi-level sync), or S-video
1 NTSC/PAL composite video
   Connectors 3 female BNC
1 female BNC
   Nominal levels 1 Vp-p for Y or component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 for C of S-video
   Minimum/maximum levels 0.0 V to 1.0 Vp-p (follows input)
   Impedance 75 ohms
Sync — ISM SC
   Output type RGsB, bi-level for component video
   Standards NTSC 3.58, PAL
   Output impedance 75 ohms
   Output level NTSC or PAL standard levels
Audio — main unit
   Gain Unbalanced output: -6 dB
Balanced output: 0 dB
   Frequency response 20 Hz to 20 kHz, ±0.5 dB
   THD + Noise 0.03% @ 1 kHz at nominal level, 0 dB gain
   S/N >90 dB, at maximum rated output drive
   Crosstalk <80 dB @ 1 kHz, fully loaded
   Stereo channel separation >90 dB @ 1 kHz
   CMRR >75 dB @ 20 Hz to 20 kHz
Audio — ISM MTP UT 4DA
   Number/signal type 4 sets of proprietary signals
   Connectors 4 female RJ-45 (shared with video)
   Gain Unbalanced output: 0 dB (unity; balanced output: +6 dB
   Frequency response 20 Hz to 20 kHz, ±1 dB
   THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N >70 dB at maximum output (unweighted)
   CMRR <-43 dB @ 20 Hz to 20 kHz
Audio input — main unit
   Number/signal type 8 stereo, balanced/unbalanced
   Connectors (8) 3.5 mm captive screw connectors, 5 pole
   Impedance >10k ohms, balanced/unbalanced, DC coupled
   Nominal level +4 dBu (1.23 V), -10 dBV (316 mV)
   Maximum level +19.5 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment -18 dB to +24 dB
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — main unit
   Number/signal type 2 (base model, upgradeable to 8) stereo, balanced/unbalanced
   Connectors (2, upgradeable to 8) 3.5 mm captive screw connectors, 5 pole
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error ±0.5 dB channel to channel
   Maximum level (Hi-Z) >+21 dBu balanced or >+15 dBu unbalanced at 1% THD+N
   Maximum level (600 ohm) >+15 dBu, balanced or unbalanced, at stated 1% THD+N
   Output volume range 0 to 64 (-64 dB to 0 dB) increments from steps 1 through 64
Control/remote — switcher
   Serial host control port 1 rear panel RS-232 or RS-422, female 9-pin D connector
1 front panel RS-232 2.5 mm mini stereo jack
   Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configurations
      9-pin D connector RS-232: 2 = TX, 3 = RX, 5 = GND
RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = TX+, 8 = RX+
      2.5 mm mini stereo jack RS-232: tip = TX, ring = RX, sleeve = GND
   Ethernet control port 1 female RJ-45 connector
   Ethernet data rate 10/100Base-T, half/full duplex with autodetect
   Ethernet protocol ARP, ICMP (ping), IP, TCP, HTTP, Telnet
   Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = off
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer® ver. 6 or higher, Netscape Navigator, Telnet
Control/remote — ISM MTP UT 4DA (pass-through)
   Serial control 4 RS-232 on (2) 3.5 mm captive screw connectors, 3 pole:
2 bidirectional (via outputs 1 and 3), 2 unidirectional (via outputs 2 and 4)
   Serial control pin configuration 1 = TX, 2 = RX, 3 = GND
   Baud rates Up to 38400 bps at up to 600' (183 m) (Higher data rates and distances are possible. Performance will vary based on baud rate and cable length.)
   Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    NOTE     Protocol is mirrored between the transmitter board and the receiver.
General
   Power 100 VAC to 240 VAC, 50-60 Hz, 75 watts, internal
   Ambient temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Fan, left to right (as viewed from the front panel)
   Mounting 
      Rack mount Yes
   Enclosure type  Metal
   Enclosure dimensions 5.25" H x 17.5" W x 11.2" D (3U high, full rack wide)
(13.3 cm H x 44.4 cm W x 28.4 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)
   Product weight  
      Main unit 14 lbs (6.3 kg)
      Optional boards 0.5 lbs (0.3 kg)
   Shipping weight  
      Main unit 21 lbs (10 kg)
      Optional boards 1 lb (1 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance 
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(7.6-092409-D9)