CrossPoint 450 Plus 6464 Retired

64x64 Ultra-Wideband Matrix Switchers for RGB and Stereo Audio

Key Features

450 MHz (-3 dB) RGB bandwidth, fully loaded
ADSP™ - Advanced Digital Sync Processing technology
DSVP™ - Digital Sync Validation Processing
Tri-color, backlit buttons
Ethernet monitoring and control

Model	Version Description	Part #
CrossPoint 450 Plus 6464 HV	64x64 RGBHV	42-085-40	Retired
CrossPoint 450 Plus 6464 HVA	64x64 RGBHV & Stereo Audio	42-085-45	Retired

This product has been retired.

The Extron CrossPoint 450 Plus 6464 Series is designed to route ultra-wideband RGBHV and stereo audio signals. Both CrossPoint^® 64x64 matrix switchers feature 450 MHz (-3 dB) bandwidth, fully loaded, and are also fully compatible with RGBS, RGsB, HDTV, component video, S-video, and composite video signals.

Housed in rack-mountable, 19-inch wide enclosures, CrossPoint 450 Plus Series matrix switchers come standard with RS-232 and RS-422 serial control capability. The unique advantage of serial control is Extron's SIS™ - Simple Instruction Set. SIS simplifies serial control by utilizing a limited set of easy to read, ASCII command codes.

The CrossPoint 450 Plus Series also features three proprietary Extron technologies: ADSP™ - Advanced Digital Sync Processing, Ethernet Control, and DSVP™ - Digital Sync Validation Processing.

ADSP Technology

Extron's ADSP technology is an all-digital process that corrects and restores the sync signal as it passes through the switcher. First, ADSP restores sync to TTL levels, 5.0 V p-p, ensuring that the projector or monitor accurately locks to sync and displays a stable image. Second, ADSP corrects the signal waveform to create sharp rising and falling edges, ensuring a more stable and reliable image in systems with different signal sources or cable lengths. Whether signal losses and distortion are caused by long cable runs, variations in display graphic card outputs, or low sync levels from many laptop computers, ADSP significantly reduces sync related problems, improving signal compatibility with many digital display devices.

Ethernet Control

The CrossPoint 450 Plus Series is equipped with an integrated, high performance Web server that provides technical support personnel with the ability to receive service and failure messages through an e-mail-enabled cell phone, PDA, pager, or e-mail account. Utilizing Ethernet control, the help desk can also view embedded Web pages to manage, monitor, and troubleshoot the switcher for the following:

AV Resource Management

Remotely select input and output ties for audio only, video only, or audio and video
Name and select global I/O presets
Set audio input and output volume levels
Set RGB delay time for glitch-free transitions
Upload firmware updates via the Internet

Operating Status and Diagnostics

Monitor primary and redundant power supply voltages
Monitor operating temperature
Recall firmware revision and other data for improved Help Desk support
Provides immediate notification via e-mail for loss of input signal, power supply failure, and other critical service information

DSVP

Verifies active sources by polling inputs for horizontal and vertical sync rate information

Features

Inputs: Video on female BNC connectors; audio on captive screw connectors

Outputs: Video on female BNC connectors; audio on captive screw connectors

450 MHz (-3 dB) RGB bandwidth, fully loaded — Offers the performance required to maintain signal integrity with the most demanding high resolution signals.

Extremely flat response — Switcher performance is further enhanced by the extremely flat response in the critical portion of the bandwidth curve, between 0 and 130 MHz.

ADSP™ - Advanced Digital Sync Processing technology — An exclusive, all-digital process that regenerates the sync signal waveform and restores sync level to 5.0 V p-p, TTL, specifications. This ensures a stable sync signal for improved signal compatibility with any LCD, DLP, plasma, or other digital display device.

DSVP™ - Digital Sync Validation Processing — Verifies active sources by polling all inputs for valid sync signals. DSVP then transmits the horizontal and vertical sync information to the user through the serial or Ethernet ports.

RGBHV switching — All models switch separate horizontal and vertical sync to ensure proper sync polarity, providing a more stable image. All models are also fully compatible with RGBS, RGsB, HDTV, component video, S-video, and composite video signals.

Channel to channel isolation — Provides excellent isolation between channels and extremely low electromagnetic emissions, perfect for minimizing signal leakage in high security or government environments.

Buffered I/O — Each input and output is individually buffered to provide maximum performance and virtually no crosstalk or signal interference between channels.

Triple-Action Switching™ for RGB delay — Blanks the screen when switching to a new source. The new sync signals precede the RGB signals, so there is no glitch shown during the transition. The time delay between the RGB and sync signals is adjustable up to five seconds through front panel, Ethernet, or serial control.

Switches both balanced and unbalanced stereo audio, HVA models only

Audio input gain and attenuation — Allows users to set the level of gain or attenuation for each audio input channel, eliminating noticeable volume differences when switching between sources.

Audio output volume adjustment and muting — Can be set dynamically for each channel through the front panel or serial control, eliminating the need for an audio preamplifier in many system designs.

Audio breakaway — Provides the capability to break an audio signal away from its corresponding video signal, allowing the audio and video signals from one source to be switched to different destinations.

View I/O mode — Users can easily view which inputs and outputs are actively connected.

I/O grouping — Allows the matrix switcher to be virtually divided into smaller sub-switchers, making installation and control easier. I/O grouping allows specific outputs, like those designated for a specific video format, to be grouped together.

Rooming — The matrix switcher can be programmed to group-selected outputs into specific "rooms," each with its own set of unique presets. Each "room" can support eight to 16 outputs with 10 different presets. A total of 10 presets each, for up to 10 rooms, are available.

Global presets — Frequently used I/O configurations may be saved and recalled either from the QS-FPC™ - QuickSwitch Front Panel Controller, Ethernet, or serial control. This time-saving feature allows I/O configurations to be set up and stored in memory for future use.

Tri-color, backlit buttons — Can be custom labeled for easy identification. The buttons illuminate red, green, or amber, depending on function, for ease of use in low-light environments.

QS-FPC™ - QuickSwitch Front Panel Controller — Provides a discrete button for each input and output, allowing for simple, intuitive operation.

Front panel security lockout — Prevents unauthorized use in non-secure environments. In lockout mode, a special button combination is required to operate the switcher from the front panel controller.

Ethernet monitoring and control — Enables the CrossPoint 450 Plus matrix switchers to be proactively monitored and managed over a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control provides for remote selection of input and output ties, adjustment and control of audio input and output levels, and advanced system diagnostics.

RS-232 and RS-422 control port — Using serial commands, the CrossPoint 450 Plus Series can be controlled and configured via the included Windows-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 and RS-422 port also makes it easy to install firmware updates.

Control software — Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 and RS-422 remote control. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may be saved for future downloading to the matrix switcher.

Optional control panels and keypads — Provide the flexibility to control a CrossPoint 450 Plus Series matrix switcher from a remote location.

Rack-mountable metal enclosure — All CrossPoint 450 Plus Series matrix switchers are housed in 19-inch wide metal enclosures.

Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.

Redundant power supplies — Primary and back-up power supplies are internally mounted. The power supply system is configured to automatically switch over to a spare hot power supply if the primary power supply fails. This means no loss of functionality in the event of a primary power supply malfunction.

SIMILAR PRODUCTS
	SMX System MultiMatrix	Digital and Analog Multi-Plane Modular Matrix Switcher

SIMILAR PRODUCTS

SMX System MultiMatrix

Digital and Analog Multi-Plane Modular Matrix Switcher

Specifications

CrossPoint™ 450 Plus 64 Series

Video

Routing

64 x 64, 64 x 48, 64 x 32, 48 x 64, 48 x 48, 48 x 32, 32 x 48, or 32 x 64 matrix

Gain

Unity

Bandwidth

450 MHz (-3 dB), fully loaded

0 - 10 MHz

No more than +0.1 dB to -0.1 dB

0 - 130 MHz

No more than +0.8 dB to -0.8 dB

Crosstalk

-80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz

Switching speed

200 ns (max.)

Video input

Number/signal type

32, 48, or 64 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video

Connectors

32, 48, or 64 female BNC

Nominal level

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

Analog: 0.5 V to 2.0 Vp-p with no offset

Impedance

75 ohms

Return loss

<-30 dB @ 5 MHz

DC offset (max. allowable)

1.5 V

Video output

Number/signal type

32, 48, or 64 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video

Connectors

32, 48, or 64 female BNC

Nominal level

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0 V to 2.0 Vp-p (follows input)

Impedance

75 ohms

Return loss

-30 dB @ 5 MHz

DC offset

±5 mV with input at 0 offset

Switching type

Triple-Action^™

Sync

Input type

RGBHV, RGBS, RGsB, RsGsBs

Output type

RGBHV, RGBS, RGsB, RsGsBs (follows input)

Input level

0.5 V to 5.0 Vp-p, 4.0 Vp-p normal

Output level

AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated

Input impedance

Inputs 1 to 16: 75 or 510 ohms, switchable
Inputs 17 to 32, 48, or 64: 510 ohms

Output impedance

75 ohms

Horizontal frequency

15 kHz to 150 kHz

Vertical frequency

30 Hz to 150 Hz

Max. propagation delay

30 ns

Max. rise/fall time

4 ns

Polarity

Positive or negative (follows input)

Audio — See MAV Plus 64 Series audio models

Audio input — See MAV Plus 64 Series audio models

Audio output — See MAV Plus 64 Series audio models

Control/remote — switcher

Serial control port

1 RS-232 or RS-422, female 9-pin D connector (rear panel)
1 RS-232-only 2.5 mm phone jack (front panel)

Baud rate and protocol

9-pin D connector

9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity

2.5 mm phone jack

9600 baud; 8 data bits, 1 stop bit, no parity

Serial control pin configurations

9-pin D connector

RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+

2.5 mm phone jack

Tip = Tx, ring = Rx, sleeve = GND

Ethernet control port

1 female RJ-45 connector

Ethernet data rate

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

ARP, ICMP (ping), TCP/IP, DHCP, HTTP, SMTP, Telnet

Program control

Extron control/configuration program for Windows^®
Extron Simple Instruction Set (SIS^™)
Microsoft^® Internet Explorer, Telnet

General

Power supply

Internal, primary and redundant
Input: 100-240 VAC, 50-60 Hz

NOTE	A redundant power supply is standard.

Power consumption

(64 or 48) x (32, 48, or 64) wideband: 110 watts
32 x (48 or 64) wideband: 50 watts
(64 x 64) sync: 65 watts

Ambient temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, vents on right and left sides

Mounting

Rack mountable with included parts

Enclosure type

Metal

Enclosure dimensions

10.5" H x 17.0" W x 14.1" D (6U high, full rack wide)
(26.7 cm H x 43.2 cm W x 35.8 cm D)

Product weight per BME

32 x 48 through 64 x 64 Series wideband video BMEs

18.0 lbs (8.2 kg)

Shipping weight per BME

32 x 48 through 64 x 64 Series wideband video BMEs

30 lbs (14 kg)

32 x 48 through 64 x 64 Series sync BMEs

29 lbs (13 kg)

DIM weight, international

44 lbs (20 kg) per BME

NOTE	An RGBHV system is shipped as 5 BMEs in 5 cartons.

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Product warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.0-091311-D8)

CrossPoint 450 Plus 6464 Retired

ADSP Technology

Ethernet Control

AV Resource Management

Operating Status and Diagnostics

DSVP

Features

Specifications

Diagram

Panel Drawing