202 Rxi VTG Kit Retired

Workstation and PC Interface Kit with built-in Video Test Generator
The Extron 202 Rxi VTG Kit
Model Version Description Part #
 202 Rxi VTG Kit 42-030-01 Retired

This product has been retired.

Specifications

Video
Routing 2 x 1 router
Gain 0.5V to 1.45V p-p
Bandwidth 300 MHz (-3dB)
Rise time 1.5 nS
Video input
Number/signal type 2 analog: RGBHV, RGBS, RGsB, RsGsBs
Connectors 2: 9-pin D male for MBC/LBC cable or buffer
Minimum/maximum levels Analog: 0.3V to 1.45V p-p with no offset at unity gain
Impedance 75 ohms or high Z, switchable (set to 75 ohms if no local monitor is connected)
Horizontal frequency 15 kHz to 150 kHz
Vertical frequency 40 Hz to 140 Hz
Return loss -30dB @ 5 MHz
Maximum DC offset 4V
Video signal characteristics — RGB 202
Rxi VTG only
Dot clock VGA 25.18 MHz,: Mac 30.04 MHz, SVGA 65.04 MHz, SGI 107.4 MHz
Pixel clock accuracy > 99.02%
Scan rate accuracy > 99.03%
Frequency range VGA: 31.475 kHz x 60 Hz,
SVGA: 37.879 kHz x 60 Hz,
XGA: 48.392 kHz x 60 Hz,
SGI: 63.928 kHz x 60 Hz
Rise/fall time 2.5 nS / 2.0 nS, measured
Video output
Number/signal type 1 analog RGBHV, RGBS, RGsB
Connectors 6 BNC female
Nominal level 0.5V to 1.20V p-p with 0.7V p-p input level
Impedance 75 ohms
Return loss -30dB @ 5 MHz
DC offset ±5mV maximum with input at 0 offset
Sync
Input type RGBHV, RGBS, RGsB, RsGsBs
Output type RGBHV, RGBS, RGsB
Input level 2V to 5.5V p-p with ±0.2VDC offset max.
Output level TTL: 4V to 5V p-p
Input impedance 10 kohms
Output impedance 75 ohms
Max. propagation delay 85 nS
Max. rise/fall time 2 nS
Polarity RGBHV: tracks polarity (or force negative sync via DIP switch)
RGBS, RGsB negative
Audio
Routing 2 x 1 stereo router
Gain Unbalanced 0dB, balanced +6dB
Frequency response 20 Hz to 20 kHz, ±0.05dB
THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated maximum output drive
S/N >90dB at rated maximum output drive (17dBu), balanced
Crosstalk >90dB @ 1 kHz, fully loaded
Stereo channel separation: >90dB @ 1 kHz to 20 kHz
Audio input
Number/signal type 2 PC level stereo, unbalanced
Connectors 2: 3.5 mm stereo jacks (female) (2 channel); tip (L), ring (R), sleeve (ground)
Impedance >10 kohms, unbalanced, DC coupled
Maximum level +8.5dBu, (balanced or unbalanced) at stated %THD+N
Audio output
Number/signal type 1 buffered stereo (2 channel), balanced/unbalanced
Connectors 1: 3.5 mm, captive screw connector, 5-pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1dB channel to channel
Maximum level (Hi-Z) > +14dBu, balanced at stated %THD+N
Maximum level (600 ohm) > +8.5dBm, balanced at stated %THD+N
Control/remote — interface
Serial control port RS-232, 9-pin female D connector (also used for contact closure)
Baud rate and protocol 9600, 8-bit, 1 stop bit, no parity
Serial control pin configuration 2 = TX,: 3 = RX, 5 = GND
Contact closure 1: 9-pin female D connector (also used for RS-232)
Contact closure pin configuration: 1 = input #1, 4 = input #2, 5 = GND
Program control Extron's control program for Windows
Extron's Simple Instruction Set™ _ SIS™
Input power 100VAC to 240VAC, 50/60 Hz, 18 watts, internal, auto-switchable
MBC power jacks 9.0VDC, 0.15A
Temperature/humidity Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +113°F (0° to +45°C) / 10% to 90%, non-condensing
Rack mount Yes, with rack shelf (part #60-190-01)
Furniture mount Yes, with an under-desk mounting kit (part #70-077-01) or
through-desk mounting kit (part #70-077-02)
Enclosure type Metal, vented
Enclosure dimensions 1.67" H x 8.75" W x 8.0" D
4.25 cm H x 22.2 cm W x 20.3 cm D
with rear BNCs: D = 8.4" (21.3 cm)
(Depth excludes knobs.)
Shipping weight RGB 202 Rxi: 7.0 lbs (3.2 kg)
RGB 202 Rxi VTG 7.0 lbs (3.2 kg)
Vibration ISTA/NSTA 1A in carton
(International Safe Transit Association)
Approvals UL, CUL, CE, FCC Class A
MTBF 30,000 hours
Warranty 3 years parts and labor
(7.2-031301-D1)

Diagram

202 Rxi VTG Kit System Diagram

Panel Drawing

202 Rxi VTG Kit Panel Drawing